Synology Security Advisory

(synology.com)

88 points | by choult 3 hours ago ago

55 comments

  • SchemaLoad 2 hours ago ago

    You just can't have a NAS exposed to the internet. Put it behind a VPN or you will have it hacked.

    • landgenoot 2 hours ago ago

      VPNs are bad from a UX perspective.

      I think the answer is mTLS.

      Unfortunately, Synology apps don't support it.

      • cloudfudge 8 minutes ago ago

        How many mTLS configs are anything but all-or-nothing access? It is so common for an app to slap mTLS on the endpoints and make the rule "anyone with a valid cert is admin on this API; anyone else gets 401." This is a step back towards a superuser/regular-user model.

        Now if you're going to use mTLS as the basis for mature authn/authz, that's a different story. But I never see anyone do that.

      • 8fingerlouie 2 hours ago ago

        Compared to faffing around with certificates, Wireguard or if you're lazy, Tailscale, is a breeze to setup.

        Generate the config, one per client, setup the client to only route specific RFC1918 networks and disable on well known wifi networks, and that's it. It literally works for years without any maintenance.

        Tailscale is easier (presumably), but also puts a corporate entity between you and your data.

        • devilbunny 15 minutes ago ago

          Tailscale is ridiculously easy, and headscale is a thing. It doesn't support everything corporate Tailscale does, but it covers the basics of "get me into my network from anywhere". You can run it on a $1/month VPS that has a public IPv4 address.

          I don't work with computers professionally, at all. It still only took me about 2 hours to get the VPS, get Debian going on it, set up headscale, and connect to it from home. Do I still use corporate Tailscale? Yes, it has some features that aren't beautifully supported on headscale, and so for the moment I'm fine with that. But I do have my backup plan in place if I need it.

      • Liuser an hour ago ago

        VPNs these days are far easier to configure than mTLS (which often need proxies on both server and client side to handle the TLS terminations and needing to worry more with certificate lifecycle).

        mTLS is a better option for distributed systems (service to service mesh networks for attestation of workload identities) instead of for human users.

      • para_parolu an hour ago ago

        How are they bad? You turn it on and it works. Don’t need to touch it. Don’t need to deal with anything but pasting key or scanning qr code

        • landgenoot an hour ago ago

          I want to make sure every picture I take will be backed up to the NAS.

          Do I turn on the VPN when I take a picture and turn it off when finished? Every time?

          What if I need multiple VPN's? Living in a country that has a bad geoip reputation, it's already a struggle of switching on and off for individual websites to work.

          • Gigachad 3 minutes ago ago

            You set up Tailscale as a split tunnel so requests to your own server go through the vpn while everything else does not.

          • xeetzer 5 minutes ago ago

            You can do split tunneling and only forward certain ips (or apps) through the vpn for your first problem.

        • katbyte 21 minutes ago ago

          How does a rando tv connect to something behind a vpn like Emby or jf?

          • Gigachad 2 minutes ago ago

            Your TV is probably on your home network. If not you could use one of those cheap travel routers to connect the hotel tv to your local

      • gmerc an hour ago ago

        tailscale / wireguard on your router are completely transparent

        • bigwheels an hour ago ago

          Strongly agree, Tailscale / WG is the way go. Unless something needs to be available to randos on the Internet, in which case mTLS is still a huge headache.

      • LoganDark 2 hours ago ago

        mTLS is the one that requires a client certificate. right? It can be quite difficult to get protocols other than HTTPS to behave well with that, mostly because the application has to worry about it and many don't bother.

        • landgenoot an hour ago ago

          Yes, that's correct. It's like SSH private keys, but for HTTP

          • QuantumNomad_ 34 minutes ago ago

            WireGuard is also very much like SSH private keys.

            A basic config to set up a VPN that only adds access to services on the VPN itself is very short and simple, both for WireGuard server and for WireGuard clients.

            You can run the WireGuard server from your home computer. For example on your NAS machine itself or some other machine you have at home. And open the port for WireGuard to the outside.

            Also some routers can run WireGuard server on the router. For example Mikrotik routers have WireGuard server built in and ready to configure [0]. Routers running OpenWrt can too [1].

            Or you can rent a small VPS and use that as your WireGuard server.

            And then, any which where you run the WireGuard server, run the WireGuard client on your laptops, iOS and Android devices, and connect client apps using VPN internal IP addresses. And your NAS etc too, if the WireGuard server isn’t running on the NAS machine itself.

            It really is quite quick to set up with server and all clients across devices.

            The only real hurdle is that on iOS you have to turn the VPN back on manually after reboot and which is sometimes easily forgotten if you only use your self hosted services occasionally. But you quickly realize oh right I have to open the WireGuard app and turn on the VPN again whenever you try to use one of your self hosted services and the client isn’t connecting.

            [0]: https://manual.mikrotik.com/docs/virtual-private-networks/wi...

            [1]: https://openwrt.org/docs/guide-user/services/vpn/wireguard/b...

          • LoganDark an hour ago ago

            I think if you want mTLS to have any significance, the application itself has to support it, otherwise you're just doing a VPN again and there's no good reason to use it over Wireguard (especially because an mTLS server will respond to port scans and a Wireguard server will not)

    • shantara 2 hours ago ago

      I wouldn't expose anything from a home network except for a single Wireguard port.

      • tripleee an hour ago ago

        Honestly even Wireguard at this point makes me nervous, seeing what happened to Nginx

        • Gigachad an hour ago ago

          You should design your home server with two layers of security. The actual server and apps should be secured in the same way you would a public application, and then wireguard on top. That way an exploit needs to compromise both layers at the same time. And with auto updates enabled the chance of that happening is low.

      • burnt-resistor an hour ago ago

        WireGuard locked behind a secure port knock firewall service.

        • IncreasePosts 42 minutes ago ago

          A secure port knock firewall service which is only enabled for a limited time when a TXT record is dead dropped on a time-based subdomain

    • dj68k an hour ago ago

      I agree. However, I also want to share photo albums with family and friends with Photo Station and/or Immich. I may also want to run Jellyfin so the same family and friends can watch my collection of... 'Linux ISOs'. Do I simply pinhole those TCP ports through my router and "hope for the best," or is there a better solution?

      • devilbunny 12 minutes ago ago

        Tailscale is the easiest way to do this. It is a single point of security failure, but it has a good track record so far.

      • gmerc an hour ago ago

        The obvious is that it’s either or this year. You can’t have both.

      • hamdingers an hour ago ago

        Run them in containers, put them behind a reverse proxy that does TLS, point fail2ban at the proxy logs. Use strong passwords. Take backups. Life is full of risk, learn to live with it.

      • ozim 30 minutes ago ago

        Yes, share photos with family by sending them ones you feel like sharing over messaging app of your choice.

        Let the family members have their own Linux ISO collections or let them pay streaming scammers.

        I am not a big family guy as you can notice. But in my defense no one really cares about my photo albums or ISO files I like.

      • Gigachad an hour ago ago

        Wait out the current wave of madness. In a year or so we will have the most secure software ever seen. We also might start to see servers with Memory Tagging to block exploits not yet found.

  • RetroTechie 31 minutes ago ago

    I've always wondered: if you take the cause of each CVE, look at underlying cause of that & repeat, how many essential root problems would you be left with?

    "Can't do math" (off-by-1 errors etc)

    "Sanitize your inputs" (escape sequences, parsing etc)

    "What are you referencing?" (null pointers, use-after-free etc)

    and error handling. Plain error codes bubbling up a call stack, or bypassing that somehow which may violate program structure.

    How many of these fundamental issues are there?

    • Waterluvian 28 minutes ago ago

      “In the beginning the Universe was created. This has made a lot of people very angry and been widely regarded as a bad move.”

  • 6thbit 2 hours ago ago

    Tied to this weakness:

      >  CWE-88: Improper Neutralization of Argument Delimiters in a Command 
    
    So, they were building shell commands from some kind of user input in the OAuth API?
    • pixl97 2 hours ago ago

      These smaller consumer devices always have the worst security practices.

    • formerly_proven 2 hours ago ago

          system("getent passwd " . $_GET['user']);
    • no-dr-onboard 2 hours ago ago

      Are surprised? Direct interpolation leading to command injection has been in the owasp ten for over a decade now.

      Prepare and parameterize statements you guys.

      • 6thbit an hour ago ago

        Kinda surprised that was happening on an oAuth API though

  • NathanKP 2 hours ago ago

    Mitigation for now is to go to Package Center -> Installed -> OAuth Service and stop it.

  • dj68k 2 hours ago ago

    The oldest one I have still serving data at home is an 1813+ running DSM 7.1.1-42962 Update 9. It's inside my network and just does SMB1 and AFP for my retro computer collection and serves as a dumping ground for security camera footage. Really curious when Syno's going to finally cut this thing off from updates since it's been years since 7.2 came out and it didn't get it.

    I just recently took a 415+ off the internet (it had Photo Station and Apache only exposed to the outside). I did the "resistor mod" on its JTAG connector to save its Atom from literally frying itself and it's also still working fine. As usual, the hardware far outlives the software.

    • beart 2 hours ago ago

      I never even moved to 7, but I seem to recall a security update not super long ago.

  • aquariusDue 2 hours ago ago

    I know this is not relevant to the topic at hand but tangentially related:

    Does anyone know of any UGREEN UGOS alternatives? I don't mind the terminal but friends prefer a web GUI and for some mundane stuff I too have started to (begrudgingly) prefer it.

    • edude03 32 minutes ago ago

      Since we’re off topic already - I do have the dxp6800 but I swapped the OS after first boot. Might be worth it to get the hardware but invest in say HexOS or similar

      • devilbunny 7 minutes ago ago

        What did you swap it for? I don't like the direction Synology is going, so my 1621+ is going to be my last one from them (but it's easily got another decade before I think about replacing it), and I'd like to be able to recommend something that's about as easy as Synology and DSM for the technical-but-not-that-technical friends and family.

  • Karupan 41 minutes ago ago

    Yay finally something I can be worried about! Was starting to feel left out by the recent security issues in PHP/Java/Ruby etc.

  • edude03 31 minutes ago ago

    Kind of wild to say there is a critical security vulnerability but the update isn’t out yet. Honestly would have preferred they didn’t tell me until it was patched

  • bix6 2 hours ago ago

    Feels like the have a new security update every week lately…

    • pixl97 2 hours ago ago

      Which is probably too slow for the number of bad security practices in these things.

  • otekengineering 2 hours ago ago

    i'm glad claude helped me install debian on my DS918 and DS920 a few weeks ago

    • pruneau 30 minutes ago ago

      Can you give us some détails?

  • lousken 2 hours ago ago

    can we like ban friday from releasing patches? it is called read only for a reason

    • akerl_ an hour ago ago

      How do you see this working?

      • lousken 26 minutes ago ago

        simple, you push for release on thursday or wait till monday

    • viraptor an hour ago ago

      As soon as you successfully ban exploitation from happening on the weekends.

      • RetroTechie 26 minutes ago ago

        Don't hackers have worker unions?

      • lousken 25 minutes ago ago

        no? schedule for release on thursday or monday

        • viraptor 8 minutes ago ago

          If you find exploitation in the wild that's not your decision anymore. It doesn't apply every time of course, but sometimes it does.